Rapid Age Calculator
What do you want to work out?

Wheel Offset Calculator

Enter the wheel width and offset, or the width and backspacing, and the calculator converts one into the other. Enter a second wheel to see how far the outer and inner edges move, and add a tyre size code to see the sidewall height, the overall diameter and the speedometer difference between two tyre sizes. All sums use the nominal sizes, so check clearance on the car.

Calculate offset and backspacing

Fill in the boxes. The answer and the working update as you type.

From 3 to 20 inches.

Positive means the mounting face sits toward the outside of the wheel. Use this, or backspacing below.

Used only when the offset box is empty. From 0 to 20 inches.

Fill the new wheel in to compare how far each edge moves.

Section width in mm, aspect ratio, R, then rim diameter in inches.

Gives the diameter change and the speedometer error.

Result

Fill in the boxes above to see the answer and every step.

All sources

Compare an old and a new wheel

The steps of the worked example appear here.

One inch is 25.4 millimetres. Backspacing in millimetres is offset_mm + width_mm / 2, and the offset is found by reversing that. Positive offset means the mounting face sits toward the outside of the wheel, the street side. For the tyre, sidewall height is section_width_mm x aspect_pct / 100 and overall diameter is rim_in x 25.4 + 2 x sidewall_mm. In the tyre example the sidewall is 101.25 millimetres and the overall diameter 634.30 millimetres. Changing to a slightly wider, lower tyre changes the diameter by -1.02 percent, so an indicated one hundred kilometres an hour is really 98.98.

Worked example

Swapping an eight inch wide wheel for a nine inch wide one with the same offset moves the outer edge out by 12.70 millimetres and the inner edge in by 12.70 millimetres, because the extra width is split evenly each side of the centreline. For the eight inch wide wheel with a positive offset used in the first example, backspacing is 5.378 inches.

Tyre size, sidewall and speedometer

For the tyre, sidewall height is section_width_mm x aspect_pct / 100 and overall diameter is rim_in x 25.4 + 2 x sidewall_mm.

In the tyre example the sidewall is 101.25 millimetres and the overall diameter 634.30 millimetres.

Changing to a slightly wider, lower tyre changes the diameter by -1.02 percent, so an indicated one hundred kilometres an hour is really 98.98.

Frequently asked questions

What is wheel offset calculator?

A wheel offset calculator converts offset into backspacing and shows how a new wheel will sit compared with the old one. Offset is the distance from the wheel centreline to the mounting surface, according to a manufacturer technical tip. For the example wheel, backspacing is 5.378 inches.

How to measure wheel offset calculator?

Measure backspacing, the distance from the mounting surface to the back edge of the wheel, and enter it with the wheel width. The calculator returns the offset. For an eight inch wide wheel with backspacing of five and a half inches it gives 38.10 millimetres. A straight-edge reading can run about half an inch larger because of the rim lip.

Related calculators

Results follow the rules shown above and are for guidance. For formal use, check them against your form, contract or the official source.